QMS -ps 800+ User Manual page 64

B.2 Manual Feed
Manual feed is used to print heavy paper, envelopes,
transparency stock, etc. and for overlay and double-sided
printing. When in manual feed the printer no longer
accepts paper from the paper cassette, but, instead, waits
for a sheet of paper to be inserted into the manual feed
slot in back20. The amber "Paper Out" light comes on
and will remain lighted until a sheet is inserted.
In manual feed paper weight can range from 11 pound to
33 pound for single-sided printing, and from 16 pound
to 33 pound for double-sided printing.
B.3 Selecting Manual Feed
Configure your QMS-PS 800+ for manual feed opera-
tion by sending your printer a file with the following
procedure:
1. Send the following program to the printer:
serverdict begin
password
exitserver
statusdict begin
Imanualfeed true def
end
2.
Send the file to be printed to the printer.
3. Line up a sheet of paper with the arrow on the
manual feed tray with the side of the paper to be
printed upon facing up. Insert the sheet into the
manual feed slot (Figure 6). The printer will draw
the sheet in, running it straight through to the paper
tray in front.
2 0 The amount of time the qMS-PS 800+ will wait for a sheet of paper to
be inserted into its manual feed slot is set by either of two parameters:
seldcraulltimeouls or manualfccdtimcout. If no paper is inserted within the
time allotted, a timeout error occurs and the current job will be aborted.
For information on setderaulttimeouts and manualfeedtimeout, see Part V,
"PostScript Addendum". Section B.2.13 and Section C.1.3
2-22
Tutorial