Use; Unpacking; Check Package Contents; Disposal Of The Packaging - Silvercrest SADP 4 A1 Operating Instructions Manual

Use

Unpacking

♦ Remove all parts and the operating instructions from the packaging.
♦ Remove all packaging material.

Check package contents

(See fold-out page for illustrations)
The product includes the following components:
▯ Fitness tracker SADP 4 A1
▯ Charging cable
▯ These operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the service hotline (see section Service).

Disposal of the packaging

The packaging materials have been selected for their environmental friendliness and
ease of disposal and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
which are no longer needed in accordance with applicable local regulations.

Charging the battery

Before using the tracker, the integrated battery must be completely charged. Before
charging, dry the charging contacts
♦ Connect the USB plug on the charger cable
♦ Connect the charging contact
contact on the tracker. This is only possible in one position (see fig. 1).
SADP 4 A1
, with a cloth to avoid corrosion.
on the charger cable
Fig. 1
to a PC or to a USB power supply.
with the charging
GB │ IE │ NI │
5 ■