Putting On The Tracker - Silvercrest SADP 4 A1 Operating Instructions Manual

Activity tracker
Hide thumbs

Advertisement

Table of Contents
Activate the Bluetooth
1. Press the menu button
display
.
2. Press the menu button
3. Press and hold the menu button
the display
Open the SilverCrest SmartActive app. The startup screen appears, followed by
the user profile.
NOTE
The data that you store in your user profile must be collected so that the entire range
of functions of your tracker deliver the correct results, such as the heart rate mode.
Set up your user profile and confirm your entries. Now all Bluetooth
range are displayed.
Select the entry SADP 4 A1. The tracker vibrates and is now connected with the
SilverCrest SmartActive app.

Putting on the tracker

NOTE
We recommend that right-handers wear the tracker on their left wrist and left-handers
on their right wrist.
Place the tracker on your wrist and close the strap (see fig. 2). The sensor
optical pulse measurement requires skin contact.
Make sure that the sensor
wrist (see fig. 3) .
SADP 4 A1
®
connection on your tracker. Proceed as follows:
before first use for about 7 seconds to activate the
twice more. The pedometer mode
. The Bluetooth
connection is activated.
®
for optical pulse measurement lies centrally on your
Fig. 2
for about 3 seconds.
is displayed.
appears on
devices in
®
for
Fig. 3
GB │ IE │ NI
 7

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

  Also See for Silvercrest SADP 4 A1

Table of Contents