The tracker has 11 modes which are listed in the following table. You can activate or
disable modes via the SilverCrest SmartActive app in the "Settings"
"Function" in the "SADP 4 A1" menu. You can activate or disable the inactivity alarm
mode under the option "Inactivity reminder". You can set alarms under "Vibration alarm".
The main functions – Heart rate mode, Pedometer mode and Sleeping mode, as well as
Time mode and Mobile device search mode – cannot be disabled.
Heart rate mode
Mobile device search mode
Activity time mode
Target monitoring mode
Vibration alarm mode
Inactivity reminder mode
You can switch between modes by brieﬂy pressing the
In the Operating overview (display screen) section you can see how you switch into
which mode and how to use the functions.
If you make settings in the SilverCrest SmartActive app and save them,
the tracker's display
Time mode /
The ﬁrst mode shown on the tracker is time mode. Time mode is the initial display on the
tracker. When the device is in power-saving mode, time mode is always shown when
you activate the display
hold the menu button
GB │ IE │ NI
next to the time. The tracker also vibrates.
. In time mode, you can lock the display
for 3 seconds.
if you press and
SADP 4 A1