Chrysler 2000 LHS Owner's Manual page 1265

21 - 96 42LE TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 272 Set Up Dial Indicator to Measure UD Clutch
Clearance
1 – DIAL INDICATOR
2 – UNDERDRIVE CLUTCH
Fig. 273 Press Down on UD Clutch Pack and Zero
Dial Indicator
1 – DIAL INDICATOR
2 – UNDERDRIVE CLUTCH
(19) Take average of four measurements and com-
pare with UD clutch pack clearance specification.
Underdrive clutch pack clearance must be 0.94-
1.50 mm (0.037-0.059 in.).
(20) If necessary, select the proper reaction plate
to achieve specifications:
UNDERDRIVE REACTION PLATE THICKNESS
4659939AB 5.837-5.937 mm (0.230-0.234 in.)
4659940AB 6.147-6.248 mm (0.242-0.246 in.)
4659941AB 6.457-6.557 mm (0.254-0.258 in.)
(21) Install the OD clutch pack (four fibers/four
steels) (Fig. 274).
Fig. 274 Install OD Clutch Pack
1 – OVERDRIVE CLUTCH PACK
(22) Install OD reaction plate waved snap ring
(Fig. 275).
Fig. 275 Install Waved Snap Ring
1 – OVERDRIVE REACTION PLATE WAVED SNAP RING
2 – SCREWDRIVER
(23) Install the OD/Reverse reaction plate with
large step down (towards OD clutch pack) (Fig. 276).
(24) Install OD reaction plate flat snap ring (Fig.
277).
LH