Operating Trim Controls - Volvo Penta 3.0GL-B Operator's Manual

7741591 / 2003-12

Operating trim controls

Control panel
The control panel has three buttons:
• The center button moves the drive trim out while it the raises
the boat's bow.
• The lower button moves the drive trim in while it the lowers
the boat's bow.
• The top button disconnects a "catch" so that the drive can
be trimmed into the BEACH position. (Press this button
and the center button at the same time.)
Control lever
The control button on the control lever has two functions:
• Pressing the top half of the button moves the drive trim out
while it the raises the boat's bow
• Pressing the bottom half of the button moves the drive trim
in while it the lowers the boat's bow.
You must press a separate switch on the instrument panel to
disconnect the "catch" so that the drive can be trimmed into the
BEACH position.
Control lever with catch button (single installa-
tion)
A switch on the control lever allows you to trim the drive:
• Pressing the switch up moves the drive trim out while it the
raises the boat's bow.
• Pressing the switch down moves the drive trim in while it
the lowers the boat's bow.
• The catch button disconnects a "catch" so that the drive
can be trimmed into the BEACH position.
Control lever with catch button (twin installation)
There are two switches on the port control lever, which
gives you the capability of individual adjustment of the
drive trim.
• Pressing the switches up moves the drive trim out while it
the raises the boat's bow.
• Pressing the switches down moves the drive trim in while it
the lowers the boat's bow.
• The catch buttons disconnect a "catch" so that the drives
can be trimmed into the BEACH position.
Features
43