iHealth BG5S Owner's Manual page 14

Test strip type is AGS-1000I.
About the first time test.
You must finish the first time test through online mode showing below from PROCESS
Ⅴ Ⅴ Ⅴ Ⅴ
.
PROCESS
About the general time test.
After you have finished the first time test, you can finish test through online mode (following
PROCESS 4 and 5).
But you can also finish test through offline mode (following step5-2 to step5-7).
Ⅰ Ⅰ Ⅰ Ⅰ
• PROCESS
Same to PRCESS 1 (above).
Ⅱ Ⅱ Ⅱ Ⅱ
• PROCESS
Same to PRCESS 2 (above).
Ⅲ Ⅲ Ⅲ Ⅲ
• PROCESS
Same to PRCESS 3 (above).
Ⅳ Ⅳ Ⅳ Ⅳ
• PROCESS
Keeping your meter is closed to your Android or iOS mobile device within 30cm. And then launch your app
and select the "QR Code" model.
Ⅳ
Note : •If you want to change the other strip model, you can re-choose anytime in setting pages.
•
Must re-confirm your test strip model, once you have changed the model of test strip into the
other one.
Ⅴ Ⅴ Ⅴ Ⅴ
• PROCESS
Ⅴ Ⅴ Ⅴ Ⅴ
Step -1: Scan the QR code on the top of the iHealth test strip vial to calibrate the test strips with the
meter.
Download the companion app
Login in your app
Activate your meter
Confirm your test strip model
Test blood glucose level
12 / 27
Ⅰ Ⅰ Ⅰ Ⅰ
to