iHealth BG5S Owner's Manual page 13

Wireless smart gluco-monitoring system
Hide thumbs Also See for BG5S:
Table of Contents

Advertisement

Step 5-5: Read the test results.
Case ①:If the meter is connecting with the app, the test result will appear both on the app and your
meter.
Case ②:If the meter is not connecting with the app, the test result will appear on the meter after
counting down from 5 to 1.
Note 5-5: The results obtained from the glucose meter are plasma-calibrated. This helps you and your
physician or other qualified healthcare providers to compare your meter results with laboratory tests.
Refer to the instructions given by your physician or other qualified healthcare providers, do not deviate
from these instructions on the basis of the result without first consulting your physician.
Step 5-6: Discard the used test strip and lancet.
Remove the used test strip from the meter using a small amount of tissue paper.
Discard the used test strip and lancet properly.
Tip: Prior to disposal, stick the lancet into the cover.
11 / 27

Advertisement

Table of Contents
loading

Table of Contents