iHealth BG5 - Wireless Smart Gluco-Monitoring System Manual
PRE-SET UP INSTRUCTIONS
- iOS device is compatible and is version V5.0 or higher.
PACKAGE CONTENTS
DOWNLOAD THE FREE iHealth APP
Prior to first use, download and install the free App "iHealth Gluco-Smart" from the App Store. Follow the onscreen instructions to register and set up your personal account.
Connect the Glucose Meter to your iOS Device via Bluetooth
- Press and hold the "Memory" button for 3 seconds to turn the meter on. At the same time, turn on Bluetooth function on your iOS device.
- In the Bluetooth menu, select the model name "BG5xxxxxx" and "Not Paired" to pair and connect. When the " " symbol appears on the meter, the meter is in Bluetooth communication mode.
- Each subsequent time you use the meter "Not Connected" will be displayed next to "BG5xxxxxx" in the Bluetooth Menu. Tap "Not Connected" to reestablish the Bluetooth connection.
MEASUREMENT INSTRUCTIONS
- Open the Bluetooth capabilities of the IOS device
- Scan QR Code on Top of the Test Strip Vial
When you are ready to open a new test strip vial, you must scan the QR Code on it. It is unnecessary to scan the QR Code for each test - Insert the test strip in the meter's Strip Port to turn on the meter
- Prepare the Lancing Device
- Pull off the lancet device cap
- Twist off the lancet protective disk
- Set a lancing level
- Puncture your fingertip
- Insert a new lancet firmly into the lancing device cup holder
- Replace the lancing device cap
- Lock the handle
- Obtain a Blood Sample
Press the lancing device against the site to be lanced. Press the release button to puncture your fingertip. Gently squeeze and/or massage your fingertip until a round drop of blood at least 0.7 micro liter forms on your fingertip. - Apply the Blood Sample to the Test Strip
Apply the blood sample to the absorbent hole of the test strip. Make sure the confirmation window of the test strip is completely filled with the blood sample. Follow the on-screen instructions in the App to complete the blood glucose testing. - Remove Test Strip from the Blood Sample
Your iOS device will beep when you should remove the test strip from the blood sample. - Read the Test Results
Wait for about 5 seconds, your blood glucose result will appear on the iOS device screen.
- Discard the Used Test Strip and Lancet
Remove the used test strip from the glucose meter using a small amount of tissue paper. Discard the used test strip and lancet properly. (Tip: Stick the lancet in the protective disk and dispose properly.)
Taking offline Measurements without an iOS Device (Meter only)
After first successful Bluetooth connection, you may perform a test even when the meter is not connected to your iOS device via Bluetooth, the meter continuous offline measurement 25 times and the meter will save up to 500 test results.
Manufactured for iHealth Lab Inc.
USA
iHealth Lab Inc. www.ihealthlabs.com
Mountain View, CA 94043, USA
+1-855-816-7705 (8:30 AM-5:00 PM PST, Monday to Friday)
Europe:
iHealthLabs Europe SARL www.ihealthlabs.eu
3 Rue Tronchet, 75008, Paris, France
+33(0)1 44 94 04 81 (9:00 AM-5:30 PM, Monday to Friday)
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download iHealth BG5 - Wireless Smart Gluco-Monitoring System Manual
Need Assistance?
Do you have a question about the BG5 that isn't answered in the manual? Leave your question here.