Glīon Electric Scooter Maintenance - Glion 215 User Manual

Dolly in the Vertical Standing Position
WARNING: Check to make sure the dolly handle is fully
retracted into the board and locked into place before operating the
scooter. Failure to do so could result in serious injury or death.
MECHANICAL:
1. Due to vibration, nuts and bolts can become loose. Make sure that all lug nuts, other
nuts and bolts are securely fastened and tighten them if necessary. To test: Pick your
scooter up 1-2 inches and bounce it off the ground. Do a quick visual and tactile
inspection of the whole scooter. Make sure you inspect all visible nuts, bolts, and
structural welds. If anything sounds, feels, or looks loose, or shows signs of stress
replace or secure them.
WARNING: Like any mechanical device, an electric scooter
and its components are subject to wear and stress. Different
materials and mechanisms wear or fatigue from stress at difference
rates and have different life cycles. If a component's life cycle is
exceeded, the component can suddenly and catastrophically fail,
causing serious injury or death to the rider. Scratches, cracks, fraying
and discoloration are signs of stress-caused fatigue and indicate that a
part is at the end of its useful life and needs to be replaced. While the
materials and workmanship of your electric scooter or of individual
components may be covered by a warranty for specified period of time by
the manufacturer, this is no guarantee that the product will last the term
GLĪON ELECTRIC SCOOTER MAINTENANCE
20