Table of Contents
Advertisement
You can connect the SMPS-750 to an external Hi-Fi / AMPLIFIER system by connecting the
AUX OUT JACK (#21) to the auxiliary input jack on your Hi-Fi / Amplifier system with 3.5mm
cable (included).
Now you can adjust both the volume control of your external Hi-Fi / AMPLIFIER system and
the MASTER VOLUME CONTROL (#18) of the SMPS-750 to find the most desirable volume
setting.
USING THE UNIT AS A PUBLIC ADDRESS SYSTEM
This unit can also be used as a PA (Public Address System).
1. Plug the microphone or guitar (not included) into the MIC IN (#7)/GUITAR IN (#8) jack on
the top of the SMPS-750.
2. Turn on the SMPS-750.
3. Turn on your microphone or guitar (not included) and start your performance.
4. Adjust the MASTER VOLUME CONTROL (#18), MIC/GUITAR VOLUME (#11) and
ECHO CONTROL (#3) if necessary.
Note: To prevent feedback or loud whistling from occurring, please be sure that the
microphone is not held too close to the speakers on the SMPS-750.
In case of malfunction due to electrostatic discharge, reset the unit by disconnecting the DC
plug of the AC Adapter from its rear DC IN JACK (#20). Wait at least for 3 minutes before
reconnecting the DC plug to the DC IN JACK (#20).
Do not subject the unit to excessive force, shock, dust or extreme temperatures.
Do not tamper the internal components of the unit.
Clean your unit with a dry cloth. Solvent or detergent should never be used.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of electrical noise such as
•
fluorescent lamps or motors.
•
CAUTION:
•
Never allow any water of other liquids to get inside the unit while cleaning.
•
•
Note: This unit is not magnetically shielded and may cause color distortion on the screen of
some TVs or video monitors. To avoid this, you may need to move the unit further away
from the TV or monitor if unnatural color shifts or image distortion occurs.
AUX OUT CONNECTION
RESETTING THE SMPS-750
CARE AND MAINTENANCE
E-11
Advertisement
Table of Contents
