Preparation For Use; Speaker Connection; Connecting The Ac Power Cord - Jensen JMC-1000 Owner's Manual

PREPARATION FOR USE

SPEAKER CONNECTION

Connect each speaker to the corresponding speaker terminals on the back panel
of the main unit. Make sure that the left speaker is connected to the left (L) speaker
jack and the right speaker to the right (R) speaker jack.
Right Speaker
Left Speaker
SPEAKER
R L

CONNECTING THE AC POWER CORD

After connecting the speakers unwind the AC power cord fully and connect it to any
convenient household AC outlet.
NOTE:
This product is designed to operate on normal 120V 60Hz AC only. Connecting
this system to any other power supply could result in damage to the unit which is
not covered by your warranty. You will note that this system is equipped with a
polarized AC power plug having one blade wider than the other. This is a safety
feature.
If this plug does not fit into your existing AC outlet,
do not try to defeat this safety feature by filing the
wide blade to make it fit into your outlet. If this plug
will not fit into your outlet, you probably have an out-
dated non-polarized AC outlet. You should have your
AC Outlet
outlet changed by a qualified licensed electrician.
AC Plug
5