Rhino-Rack RLCP23 Manual

Toyota prado 3 bar heavy duty system

Rhino-Rack Toyota Prado

3 Bar Heavy Duty System

(RLCP23)

Important:

Please read these instructions carefully prior to installation.

Layout

Important Information

Maximum carrying capacity : 100kg evenly distributed over the three (3) cross bars.

Recommendations:

Please remove roof racks when putting vehicle through an automatic car wash.

Use only non-stretch fastening ropes or straps.

Sensitivity to cross winds, behaviour in curves and braking:

Please remove cross bars when putting vehicle through an automatic car wash.

Load rating:

Table of Contents

Do you have a question about the RLCP23 and is the answer not in the manual?

Page 1 Rhino-Rack Toyota Prado 3 Bar Heavy Duty System (RLCP23) Important: Please read these instructions carefully prior to installation. Layout Important Information Maximum carrying capacity : 100kg evenly distributed over the three (3) cross bars. Recommendations: Please remove roof racks when putting vehicle through an automatic car wash.
Page 2 Rhino-Rack Toyota Prado 3 Bar Heavy Duty System (RLCP23) Parts List Item Component Name Part No. 13, 14, 15, 16, 17, 18 19, 20 Tools Required: for future use if needed.
Page 3 Rhino-Rack Toyota Prado 3 Bar Heavy Duty System (RLCP23) FRONT (Top view of vehicle) M389 M390 M391 M392 correctly installed. FRONT of vehicle M393 M394 REAR...
Page 4 Rhino-Rack Toyota Prado 3 Bar Heavy Duty System (RLCP23) Place each pad into its position as stated in the...
Page 5 Rhino-Rack Toyota Prado 3 Bar Heavy Duty System (RLCP23)
Page 6 Rhino-Rack Toyota Prado 3 Bar Heavy Duty System (RLCP23) Equal over hang as shown caps in place.