Linux And Ubuntu Programming Guide; Gpio; Can Bus; Uart Switch - Winmate FA30-200 User Manual

USER MANUAL CHAPTER 3 SOFTWARE PROGRAMMING GUIDE

3.2 Linux and Ubuntu Programming Guide

3.2.1 GPIO

General-purpose input/output (GPIO) is a generic pin on an integrated circuit whose
behavior—including whether it is an input or output pin—is controllable by the user
at run time. GPIO pins have no predefined purpose, and go unused by default.
You can find all information about Linux's GPIO installation inside the Driver CD.
Programming Guide link:
FA30-200 CD\Linux_QT Documents and Files\GPIO\ProgrammingGuide

3.2.2 CAN BUS

You can find all information about Linux's CANBus installation inside the Driver CD.
Programming Guide link:
FA30-200 CD\Linux_QT Documents and Files\Canbus\ProgrammingGuide

3.2.3 UART Switch

You can find all information about Linux's UART Switch installation inside the Driver
CD.
Programming Guide link:
FA30-200 CD\Linux_QT Documents and Files\UART\ProgrammingGuide
FA30-200 MOTHERBOARD 26