Additional 3C Om Software; 3Com Mobile Connection Manager; 3Com Diagnostics - 3Com 3CRFW102 User Manual

4
3Com Mobile
Connection Manager

3Com Diagnostics

A
DDITIONAL
3Com Mobile Connection Manager (MCM) stores the information you need for a
connection from different locations, saving you the time and trouble of setting up
a new connection each time you move to a new location or dial in to a new
location. A mobile configuration contains the correct system settings to reach a
specific computer network or dial-up location from your current location. These
preferred settings are categorized by and stored in MCM profiles and
configurations.
When you want to connect to a specific network, run MCM to examine the list of
existing mobile configurations. The name of the last-used configuration is shown
in bold. If a mobile configuration has already been created for this location, select
it and click Activate or Connect to start the connection process. If no mobile
configuration has been created, MCM lets you create a new one by importing
configurations developed by your system administrator, or creating a new
configuration.
The 3Com Firewall PC Card with 10/100 LAN uses two types of network card
diagnostics programs: a Windows-based diagnostics program and a DOS-based
diagnostics program.
NOTE: If diagnostics are desired for a network interface card installation, install
them first from the 3Com EtherCD before installing the 3Com Firewall Client.
Installing them over the Firewall Client may make the card inoperable.
Before starting any diagnostics program, close all running applications.
Use the Windows-based 3Com Network Interface Card Diagnostics program if you
are running any of the following operating systems:
• Windows XP
• Windows 2000
• Windows 98 SE
• Windows NT 4.0
Use the 3Com DOS Diagnostics program if you are running any of the following
operating systems:
• DOS
• NetWare
3C S
OM OFTWARE