Rear Panel - Yamaha EAD10 Owner's Manual

Panel Controls and Functions

Rear Panel

[FOOT SW] Jack (page 48)
Connects a foot pedal or foot switch (sold sep-
arately).
FC5 FC7
[USB TO DEVICE] termi-
nal (page 30)
Connects a USB flash
drive.
Cannot be used with other
USB devices.
[USB TO HOST] terminal (page 25)
Connect a computer or smart device
such as an iPhone or iPad to send and
receive digital signals (audio and MIDI).
Additional parts are required for connect-
ing an iPhone or iPad. For more informa-
tion, refer to "iPhone/iPad Connection
Manual" (PDF).
14 EAD10 Owner's Manual
TO SENSOR UNIT [A] jack
(page 17)
Connect to the [A] jack on the
Sensor Unit using the connec-
tor cable (included).
HH65
etc.
TO SENSOR UNIT [B] jack
Connect to the [B] jack on the
Sensor Unit.
USB cable
DC IN jack (page 17)
Use the AC adaptor that
came with the EAD10.
Cord hook (page 17)
Wrap the AC adaptor cord
around this hook to prevent
accidental unplugging dur-
ing use.
Cord hook
AC adaptor cord
For more information on the [qKICK/w]
to [y] jacks, see "About the Trigger Input
Jacks" (page 16).
Standard phone plug
(6.3 mm)
Stereo mini plug
(3.5 mm)
[AUX IN] (auxiliary
input) jack
OUTPUT [R]/[L/MONO]
(page 17)
jacks (page 17)
Connect to the
Connect to powered speak-
headphone jack on
ers or other such PA system.
a smart phone or
These jacks are standard
portable music
phone type output jacks.
player.
If mono output is required,
use only the [L/MONO] jack.
Sensor Unit