Creating Your Own Scene - Yamaha EAD10 Owner's Manual

Creating Your Own Scene

You can customize preset Scenes to create your own Scene.
Changing
the Reverb Type
1.
Press the button
below "REV" ([F1]).
The REVERB TYPE screen
opens.
2.
Use the [–] or [+] but-
tons to select the
Reverb type you want
to use.
About the "BYPASS"
In each screen, selecting "BYPASS" ([F3]) causes the corresponding knob lamps to
dimly flash and the Effect not applied. Each press of the [F3] button turns the bypass set-
ting on or off. When you select "BYPASS" while the knob is turned fully to the mini-
mum position, the two lamps below the knob dimly flash.
Changing
the Effect Type
1.
Press the button
below "EFF" ([F2]).
The EFFECT TYPE screen
opens.
2.
Use the [–] or [+] but-
tons to select the
Effect type you want
to use.
Use the " " ([F1]) and
" " ([F2]) buttons to change
the tempo for tempo synced
Effects.
Basic Guide
Creating Your Own Scene
NOTE
To check the Trigger Sound, turn the
[TRIGGER] knob clockwise to
increase the volume.
Changing
the Trigger Sound
 Changing the Trigger
Sound on the Bass Drum
(Set as a Factory Default)
1.
Press the button below
"TRG" ([F3]).
The TRIGGER INST screen opens.
Trigger Sound name
Trigger Sound number
2.
Use the [–] or [+] buttons
to select the number for
the Trigger Sound you
want to use.
EAD10 Owner's Manual 35