Rear Panel - Yamaha STAGEPAS 200 Owner's Manual

Rear panel

INPUT [1/LINK], [2], [3] jacks
*
These are Mic/Line input jacks for channels 1-3. These are
combo jacks that support both XLR and phone plugs.
Connect microphones, guitars, electronic musical
instruments or audio equipment.
If you connect two units of this product to each other (for
monaural expansion), use the [1/LINK] jack as an input
jack for the second unit. We also recommend that you
use this jack if you plan to input a line-level signal from
an external mixing console.
The [2] and [3] phone jacks support Hi-Z input. Use these
jacks to input a low-level signal, such as a microphone or
an acoustic-electric guitar.
( INPUT [4/5 (SUM)] jack
This line input jack supports a phone-type plug. Connect
a line-level device such as an electronic musical
instrument, CD player, or portable audio player. A stereo
input signal will be internally mixed into a monaural
signal.
A signal from the Bluetooth device is always mixed and
input to channel 4/5.
12
STAGEPAS 200BTR STAGEPAS 200 Owner's Manual
A
* (
OUTPUT [MONITOR/LINK] jack
A
This monaural output jack supports a phone-type plug.
A mixed signal is output from this jack to a connected
device, such as a powered speaker. Use the MONITOR/
LINK [LEVEL] control to adjust the output level.
This jack is useful when you are recording live
performance to a recorder, or distributing live streaming
audio.
If you connect two units of this product to each other (for
monaural expansion), use this jack as an output jack for
the first unit.
NOTE
If the feedback suppressor is enabled, this jack will output the
affected signal.
B [AC IN] jack
Connect the included power cord here. First, connect the
power cord to this jack, and then insert the power plug
into an AC outlet.
Be sure to turn off the power switch before connecting or
disconnecting the power cord (STAGEPAS 200 only).
• This product has been designed for grounded use. To
avoid electrical shock and damage to connected devices,
be sure to ground the unit using the included power cord.
If you have any questions regarding proper connections,
please contact your nearest Yamaha dealer.
• Use only the included power cord. Otherwise, heat may be
generated or an electrical shock may be caused.
B
WARNING