Using The Click (Metronome) - Yamaha EAD10 Owner's Manual

Using the Click (Metronome)

Set the Click (Metronome) tempo, volume, type of sound, etc.
1.
Press the [ ] (Click) button.
Changing the
Tempo
Slower Faster
Starting and
Stopping the Click
2.
Press the button
below " " ([F1])
to start the Click.
The [CLICK] button flashes
in sync with the tempo while
the Click sounds.
3.
Press the button
below " " ([F1])
to stop the Click.
NOTE
You can also press the [
(Click) button to start the Click
and to stop the Click.
The CLICK screen
opens.
Setting Click Beat
Volumes and Types of
Sounds
2.
Press the button
below "VOL/BEAT"
([F2]).
The VOLUME/BEAT screen
opens.
]
(continued to the next page)
Using the Click (Metronome)
Press the [EXIT] but-
ton to return to the
previous screen or
the Scene screen.
Setting the Tempo by
Tapping the Button
(Tap Tempo)
Tap the button at the desired tempo to set
the tempo.
2.
Press the button below
"TAP" ([F3]).
The TAP screen opens.
3.
Tap the button below "
TAP" ([F3]) at least 3 times.
The tapped tempo is detected and appears
on the screen.
NOTE
You can also set the tempo by striking the
bass drum or a pad connected to the Trig-
ger Input jacks.
EAD10 Owner's Manual
Basic Guide
39