Yamaha EAD10 Owner's Manual page 32

Setup Guide
Setting Up the Sensor Unit
 Manually Adjusting the Sensor Unit Settings
1.
Press the [ ] (Sensor Unit) button.
The SENSOR UNIT screen appears.
Press the [EXIT] button to
return to the Scene screen.
2.
Use the buttons below "
[F2]) to move the cursor.
3.
Use the [–] or [+] buttons to adjust the value.

Setting Finer Adjustments
1.
With the SENSOR UNIT screen displayed, press the button
below " " ([F2]).
The SENSOR UNIT (fine adjustment) screen opens.
TRG SENS
(Trigger Sensitivity)
[L]
[R]
28 EAD10 Owner's Manual
" or " " ([F1] or
Sensitivity for The larger the value, the louder
light strokes the sound produced when struck
lightly.
NOTE
• If this is set too low, the Trigger
sound might not be played.
• If this is set too high, the snare
drum or toms might trigger the
bass drum Trigger Sound when
hit.
Mic gain left Adjust the L and R settings when
the volume balance between the
left and right Mics is poor.
NOTE
The same value is displayed in the
Mic gain right
[L] setting in the SENSOR UNIT
(fine adjustment) screen and in the
"MIC" setting in the SENSOR UNIT
screen.
Mic gain
Trigger gain
Lower
SENSOR UNIT screen
SENSOR UNIT (fine adjustment) screen
Higher