Yamaha EAD10 Owner's Manual page 27

4.
Hook the AC adaptor's cord around the cord
hook to secure it in place.
CAUTION
Excessive bending can damage the AC adaptor cord
and create a fire hazard. Ensure, therefore, that the
power cord is not bent at an extreme angle when
wrapped around the hook.
5.
Plug the AC adaptor's AC plug into a domes-
tic power outlet.
CAUTION
Even when the [ ] (Standby/On) switch is in standby
status (power lamp is off/display is off), electricity is
still flowing to the instrument at the minimum level.
When you are not using the EAD10 for a long period of
time, make sure that you unplug the AC adaptor from
the wall AC outlet.
NOTE
When disconnecting the AC adaptor, turn the instrument and then carry out this procedure in reverse order.
 Connecting Headphones
Connect the headphones to the [PHONES] jack.
CAUTION
Do not use headphones at high volume for an extended
period of time. Doing so can cause loss of hearing.
NOTE
Please take note of the following if you are using open or semi-
open headphones.
- Volume tends to sound louder because of the sound of the
drums leaking into the headphones when playing.
- When recording or connected to a PA, the Click sound from
the headphones may get mixed into your recording or PA
system.
Cord hook
AC adaptor cord
Power outlet
Front panel side
Setup Guide
Setting Up
AC adaptor
EAD10 Owner's Manual 23