Operation; How Your Shower Works - Mira Advance ATL Installation & User Manual

1. how your shower Works

hot water is produced by passing cold
water through a heating tank.
The shower constantly monitors the
following conditions:
• T h e i n c o m i n g
temperature.
• The showering temperature.
• The flow rate of water.
• The current user settings.
The flow rate may automatically adjust to
maintain the current temperature setting.
as part of this process, a series of 'clicks'
may be heard, this is a normal part of the
operation when the shower is in use.
The showering temperature is adjusted by turning the Temperature Control Dial,
which varies the flow of cold water passing over the elements. The slower the rate
of flow, the warmer the shower and vice versa. Care is required when adjusting flow
or temperature, make sure that the temperature has stabilised.
note! Rapid/Excessive movement of the flow and/or temperature control levers may
result in momentary unstable blend temperatures.

oPeRaTIon

c o l d w a t e r
23
+
_
+
_
+
_
+
_