BeaB Care
If the shower's maximum temperature is set to 41 °c or cooler, there is a clear triple
beep tone and single pulse of the start/stop light every time the double pole switch
is turned on. This is to show that the appliance is in a 'BeaB Care' compliant mode.
If recommissioning is required whilst in this mode, wait until beeps have passed
before starting the commissioning cycle.
Memory Model
If the maximum temperature is adjusted after having been stored in one or more of
the memory buttons (refer to section: 'operation, storing the Memory Presets'),
then the showering temperature cannot exceed the new maximum setting.
e.g.
Memory 1
stored at 45°C
Maximum
temperature now
adjusted to 48°C
40°C
Maximum
temperature
adjusted to 40°C
48°C
22
Memory 1
automatically
cannot exceed
40°C
Memory 1 now
back to original
stored temperature
of 45°C