Section 12-Options; Installing The Seat Positioning Strap - Invacare Concept 45 User Manual

12 OPTIONS
12 Options
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.

12.1 Installing the Seat Positioning Strap

WARNING
ALWAYS wear your positioning strap. Inasmuch as the Seat Positioning Strap is an option on this wheelchair (You may
order with or without the seat restraint), Invacare strongly recommends ordering the Seat Positioning Strap as an
additional safeguard for the wheelchair user.
1. Remove the bottom back upholstery screw from the wheelchair.
2. Position the seat positioning strap half between the back cane and
back upholstery.
3. Secure the back upholstery and seat positioning strap to the
wheelchair with the existing back upholstery screw.
4. Repeat STEPS 1-3 for the opposite side of the wheelchair.
®
Invacare Concept 45 Wheelchair
Back Upholstery
Screw
Strap Positioning
Strap
FIGURE 1
56
Back Cane
Back Upholstery
Installing the Seat Positioning Strap
Part No. 1088191