Raising/Lowering Elevating Legrest Assembly; Adjusting The Calfpad - Invacare Concept 45 User Manual

5 FRONT RIGGINGS
5.3

Raising/Lowering Elevating Legrest Assembly

WARNING
Ensure hands and fingers are clear of elevating
legrest mechanism before pushing release lever to
lower the elevating legrest. Otherwise injury may
occur due to pinch points.
The wheelchair user's leg MUST be supported by
an assistant before attempting to lower legrest.
1. To raise the elevating legrest, the assistant should hold the support
tube and raise the elevating legrest until the desired height is
obtained.
2. To lower the elevating legrest, perform the following:
A. Support user leg with one hand.
B. Push release lever downward with other hand.
C. Gently, lower user leg down and rest against the legrest.
Support Tube
FIGURE 3 Raising/Lowering Elevating Legrest Assembly
®
Invacare Concept 45 Wheelchair
Release Lever
5.4

Adjusting the Calfpad

1. Turn the calfpad towards the outside of the chair.
2. Slide the calfpad up or down until the desired position is obtained.
3. To secure the calfpad, turn the calfpad towards the inside of the
chair.
Legrest Tube
FIGURE 4 Adjusting the Calfpad
36
Calf Pad
Part No. 1088191