Subscribe to Our Youtube Channel
Related Manuals for Petsafe PDT00-14678
Summary of Contents for Petsafe PDT00-14678
- Page 1 Vibration Remote Trainer operating and training guide Model number Pdt00-14678 Please read this entire guide before beginning...
- Page 2 Aggressive dogs can cause severe injury or death to their owners and others. If you are not sure that this product is right for your dog, please talk to your veterinarian or a certified trainer. • The PetSafe Vibration Remote Trainer is not a toy. Keep away from the reach of children. Use it only for ®...
- Page 3 It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. The PetSafe Vibration Remote Trainer must be used only on healthy dogs. We recommend that you take your ®...
-
Page 4: Table Of Contents
Customer Care Center at 1-800-732-2677. To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. -
Page 5: Components
Operating and Receiver Collar Training Guide 3-volt 3-volt Lithium Batteries Lithium Battery Handheld (CR2032) (CR2) Remote Wrist Strap other Items you may need • Small Phillips screwdriver • Pliers • Scissors • Lighter • Non-metallic collar and 10-foot leash www.petsafe.net... -
Page 6: How The System Works
How the System Works Now you can experience the difference a Remote Trainer can make. Spend less time training and more time enjoying your dog. The Petsafe Vibration Remote Trainer assists you in controlling your pet without a leash in ®... -
Page 7: Key Definitions
LED (Receiver Collar): Indicates that a button is pressed Points Cover and also serves as a low-battery indicator. Red LED: Indicates low battery and when Vibration Button is pressed. Green LED: Indicates good battery and when Tone Button is pressed. Also indicates when Pairing Mode is complete. www.petsafe.net... -
Page 8: Operating Guide
operatInG GuIDe STEP 1 prepare the Handheld remote To Insert and Remove the Battery 1. To remove, use a coin and turn the Battery Cover counter-clockwise until the right triangle aligns with the unlock symbol on the Handheld Remote housing (1A). 2. - Page 9 10 continuous seconds.) Tone and Vibration Transmits Pairing command to the Receiver Orange LED on for length of button press Buttons held Collar when “P” is visible on the Digital Display. simultaneously www.petsafe.net...
-
Page 10: Prepare The Receiver Collar
Replacement batteries can be found at many retailers. Contact the Customer Care Center or visit our website at www.petsafe.net for a list of common retailers. Risk of explosion if battery is replaced by an incorrect type. Do not short circuit, mix old and new batteries, dispose of in fire, or expose to water. -
Page 11: Fit The Receiver Collar
(3C). The fit should be snug but not constricting. 5. Allow your dog to wear the Receiver Collar for several minutes then recheck the fit. Check the fit again as your dog becomes more comfortable with the Receiver Collar. www.petsafe.net... - Page 12 6. Trim the collar as follows: (3D) a. Mark the desired length of the collar with a pen. Allow for growth if your dog is young or grows a thick winter coat. b. Remove the Receiver Collar from your dog and cut off excess. c.
-
Page 13: To Pair The Handheld Remote And Receiver Collar
5. Change the level to 1 Low by pressing the Vibration Up Button (+) on the Handheld Remote and then press the Tone Button. The Receiver Collar will emit a tone, verifying that it is paired with the Handheld Remote. 6. If the Receiver Collar does not respond, please contact the Customer Care Center. www.petsafe.net... -
Page 14: Training Guide
Introducing the Remote Trainer: Introduce your PetSafe Receiver Collar when your dog graduates from ® puppy stage and understands basic obedience commands. PetSafe Receiver Collars should only be used ® with pets who are over 4 to 6 months of age. -
Page 15: Training Your Pet With Tone
Do not shave the pet’s neck as this may increase the risk of skin irritation. If, after completing all of these steps, your dog still does not indicate he is feeling the Vibration, please contact Customer Care Center or visit our website at www.petsafe.net. www.petsafe.net... -
Page 16: Boost
It is easy and you should find the point where your dog first perceives the Vibration. See “Find the Best Vibration Level for Your Pet”. “Good Dog” in the Home or Outside: Stopping unwanted behavior is easy using the PetSafe Remote ®... -
Page 17: Teaching Basic Obedience
6. Release your pet from the “Sit” command and play. 7. Repeat Steps 2 through 6. Note: If your pet breaks the “Sit” command, repeat steps 3 through 6. Keep your pet close to you while teaching the “Sit” command. www.petsafe.net... -
Page 18: The "Recall" Command
The “Recall” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a 10-foot leash. Note: Be sure the extra collar does not put pressure on the Vibration Points. 2. Hold your leash in one hand and the Handheld Remote in the other. -
Page 19: Eliminating Unwanted Behavior
3. Release the Vibration Button immediately once your pet is sitting, and verbally praise him. 4. If your pet ignores the Vibration, increase the level by 1. 5. Practice this exercise in several different areas and use different people for distractions. www.petsafe.net... -
Page 20: Digging
Digging It is important to first understand why your pet is digging. Many dogs, such as terriers, were bred to flush out prey, and digging is very innate to them. Other dogs may be digging to find a cool spot to lie down, or simply out of boredom. -
Page 21: Chasing
Vibration Button until he stops. 5. When your dog stops chasing the object, immediately release the button, walk backwards and give the command “Come.” Praise your dog as he comes to you. 6. Repeat the process until your dog stops chasing the object. www.petsafe.net... -
Page 22: Trash Raiding
Trash Raiding The easiest way to prevent trash raiding is to remove garbage and tempting food from your pet’s environment. You can use the Vibration Remote Trainer to teach your pet to stay away from these items; however, you must be prepared to correct your pet every time he approaches them. -
Page 23: Frequently Asked Questions
How old does my pet have to be • Your pet should be able to recognize basic obedience before using the PetSafe Vibration commands such as “Sit” or “Stay”. Pets should be at least 6 ®... -
Page 24: Troubleshooting
Monday - Friday 10:30 AM - 7 PM This product has the benefit of a limited manufacturer’s warranty. Details of the warranty applicable to this product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to PetSafe Ltd. -
Page 25: Battery Disposal
At the end of the product life, please contact our Customer Care Center to receive instructions on proper disposal of the unit. Please do not dispose of the unit in household or municipal waste. For a listing of Customer Care Center telephone numbers in your area, visit our website at www.petsafe.net. perchlorate Battery Perchlorate Material –... -
Page 26: Terms Of Use And Limitation Of Liability
One Year Non-Transferrable Limited Warranty This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at www.petsafe.net and/or are available by contacting your local Customer Care Center. - Page 27 Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 0800 543 054 (New Zealand). Protected by patents: US8069823, AUS2008203914, AUS2008348347, CAN2676885, CAN2712223, NZ578757. Other patents pending.. Other patents pending. www.petsafe.net...
- Page 28 Radio Systems Corporation ® 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 www.petsafe.net 400-1818 ©2014 Radio Systems Corporation...
Need help?
Do you have a question about the PDT00-14678 and is the answer not in the manual?
Questions and answers