100, 300, 600 and 900 yard
remote trainers (11 pages)
Summary of Contents for Petsafe Elite Pendant PDT00-13377
Page 1
Elite Pendant Remote Trainer ™ operating and training guide Model number Pdt00-13377 Please read this entire guide before beginning...
Page 2
It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. PetSafe Remote Trainers must be used only on healthy dogs. We recommend that you take ®...
Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that influence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677.
: Scissors : Lighter : Non-metallic collar and 10-foot leash How the System Works The latest evolution in Remote Trainers is now available from PetSafe brand. The new Elite Pendant ® ™ Remote Trainer improves communication with your pet using a stylish, easy-slide remote and a unique programmable Pendant Receiver.
Micro USB Port: Connects to myTrainer software. Also ™ Gauge used to connect Power Adapter for charging. Keep the cover in place when not charging to keep debris out of the opening. Micro USB Port (with cover) SmartTouch On/Off www.petsafe.net...
Operating Guide Step 1 Prepare the Handheld Remote Charge the Handheld Remote USB Cable 1. Lift the rubber cover protecting the Remote’s Micro USB Port placed in the and insert one of the Micro USB connectors (1A). Handheld 2. Insert the USB connector on the opposite end into the power Remote Micro USB Port adapter (1B) and plug into a standard wall outlet.
Page 7
Tone being received Green LED flashes Tone beep Pendant is turning OFF Red LED appears for 3 seconds Beeps high to low ™ Pendant is charging Red LED is solid None ™ Pendant charging complete Green LED is solid None ™ www.petsafe.net...
Rechargeable Batteries : The rechargeable Lithium Ion batteries are not memory sensitive and do not require depletion before charging. : The batteries come partially charged from the factory, but will require a full charge (4-5 hours) before the first use. : Remember—always keep batteries away from flame.
2. Press and hold the SmartTouch On/Off buttons for 5 seconds. 3. The Pendant will beep and the LED will flash. ™ 4. Press the Tone button. 5. The Pendant will respond and pair. ™ 6. If the Pendant does not respond, please contact the Customer Care Center. ™ www.petsafe.net...
Training Guide General Tips : Eliminate one misbehavior or teach one obedience command at a time. If you move too fast with training, your pet may become confused. : Be consistent. Correct your pet every time he misbehaves. : Unless you can supervise him, it is recommended that you restrict your pet from situations in which he has a history of misbehaving.
“Test Light Instructions” section. If after completing all of these steps your dog still does not indicate he is feeling the stimulation, please contact Customer Care Center or visit our website at www.petsafe.net. Teaching Basic Obedience The “Sit” Command 1.
Page 12
The “Recall” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Pendant , and attach a 10-foot ™ leash. Note: Be sure the extra collar does not put pressure on the Contact Loops. 2. Hold your leash in one hand and the Handheld Remote in the other.
No other people or pets should be in the yard, as you do not want your pet to associate the stimulation with anything other than his digging. Your pet must be securely fenced in or contained during training. www.petsafe.net...
Page 14
3. From a window or area where your pet cannot see you, wait until your pet begins to dig. 4. While your pet digs, press the Stimulation button and release it when he stops digging. Only press the button while your pet is in the act of digging, and do not say anything to him.
4. Do not say anything, as you want your pet to associate the stimulation with his behavior, not you. 5. If your pet does not respond to the stimulation, increase the Intensity Level by 1 and repeat the process. 6. Repeat this process in several different locations with different temptations. www.petsafe.net...
Is the Pendant Receiver ™ waterproof? Port when not charging. : We do not recommend any of our products to be used on Can I use the PetSafe Elite ® Pendant Remote Trainer aggressive pets. We recommend you contact your local ™...
Note: If the Test Light does not flash, recharge the battery and re-test. If Test Light still does not flash, contact the Customer Care Center or visit our website at www.petsafe.net. Customer Care International USA & Canada - Tel: 800-732-2677 Monday - Friday 8 AM - 8 PM / Saturday 9 AM –...
This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to Radio Systems PetSafe Europe Ltd, 2nd Floor, Elgee Building, Market Square, Dundalk, Ireland.
Page 19
Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 0800 543 054 (New Zealand). www.petsafe.net...
It is available at ® ® http://get.adobe.com/reader. myTrainer software can be easily removed from your computer by clicking on the uninstall icon ™ in the Start menu under the PetSafe folder. Customer Care Center 1-800-732-2677...
™ ® notification area. To restore myTrainer to the viewing area, double click on the PetSafe icon ™ or select Show from the right click context menu. If a Pendant Remote Trainer device is ™...
Exploring myTrainer Software ™ myTrainer software is comprised of four tab pages and a Summary section. When at least one ™ device is plugged into the USB port, the Summary section is always visible; while the tab pages can be changed by left clicking the mouse on the tab that interests you (Fig 2). When no devices are plugged into the USB ports, you will be limited to the Help tab, despite any tab you may click on.
Page 23
When the process completes, a message will appear confirming the device has been updated or that the process failed. When the myTrainer software is up to date, the DOWNLOAD button will be disabled (grayed ™ out) and the status bar will display “No updates available” (Fig. 4). Fig. 4 www.petsafe.net...
Page 24
Help Tab: The Help tab will aid in maximizing your satisfaction of the Pendant Training System ™ by giving you access to a wealth of information. The Help tab contains links to the Product Manual, FAQs, the PetSafe website, Product Registration, Customer Care Center email and ® contact info, the PetSafe Cloud dashboard, Twitter, Facebook, YouTube, and the official ®...
What happens if the USB is disconnected during a retry the download so that the device is usable. download? : Run the uninstall.bat program found under the PetSafe folder How do I remove myTrainer ™ software from my in Start->All Programs, or use Windows Uninstaller in Start- computer? >Control Panel->Programs->Uninstall, double left click on...
Need help?
Do you have a question about the Elite Pendant PDT00-13377 and is the answer not in the manual?
Questions and answers