Suunto TRAVERSE series User Manual page 81

To change time settings:
1. In the Time/date menu, scroll to the desired setting with [Start] or
[Light] and select the setting with [Next].
2. Change the values with [Start] and [Light] and save with [Next].
3. Go back to the previous menu with [Back Lap], or keep [Next]
pressed to exit.
Sunrise and sunset time views are available when GPS has been
activated. If GPS is not active, sunrise and sunset times are based on
the last recorded GPS data.
3.34.1 Alarm clock
You can use your Suunto Traverseas an alarm clock. To
access the alarm clock and set the alarm:
1. In the options menu, go to GENERAL, then to Time/date and
Alarm.
2. Set the alarm on or off with [Start] or [Light]. Accept with [Next].
3. Set the hours and minutes with [Start] and [Light]. Accept with
[Next].
4. Go back to the settings with [Back Lap], or keep [Next] pressed to
exit the options menu.
81