Suunto TRAVERSE series User Manual page 54

3. If you have not yet set up your Suunto Traverse, do so now (see
Getting started
If you are already using your Suunto Traverse, keep [Next] pressed
to enter the options menu and scroll to PAIR with [Light]. Select
MobileApp with [Next].
4. Enter the passkey shown on your watch display into the paring
request field on your mobile device and tap [Pair].
NOTE: You can change your Suunto Traverse general settings
offline. Customizing sport modes and keeping time, date and GPS
satellite data up to date require an internet connection over Wi-Fi or
mobile network. Carrier data connection fees may apply.
3.21.1 Syncing with mobile app
If you have paired your Suunto Traverse with Suunto Movescount App,
changes in settings, sport modes, and new moves are automatically
synced default when the Bluetooth connection is active. The Bluetooth
icon on your Suunto Traverse flashes when data is being synced.
This default setting can be changed from the options menu. To
turn off automatic syncing:
1. Keep [Next] pressed to enter the options menu.
2. Scroll to CONNECTIVITY with [Light] and select with [Next].
3. Press Next again to enter the MobileApp sync setting.
4. Toggle off with [Light] and keep [Next] pressed to exit.
When automatic syncing is off, you need to manually start syncing to
transfer settings or new moves to the app.
54
) and press [Start] when asked to pair MobileApp.
2