Suunto TRAVERSE series User Manual page 69

[Light]. Accept with [Next].
6. Press [Next] to select Navigate.
7. If you selected a waypoint in the middle of the route, Suunto
Traverse prompts you to select the direction of the navigation.
Press [Start] to select Forwards or [Light] to select Backwards.
If you selected the first waypoint as the starting point, Suunto
Traverse navigates the route forward (from the first to the last
waypoint). If you selected the last waypoint as the starting point,
Suunto Traverse navigates the route backwards (from the last
to the first waypoint).
8. If you are using the compass for the first time, you need to
calibrate it (see
compass, the watch starts searching for a GPS signal and
displays GPS found after acquiring the signal.
9. Start navigating to the first waypoint on the route. The watch
informs you when you are approaching the waypoint and
automatically starts navigating to the next waypoint on the
route.
10. Before the last waypoint on the route the watch informs you that
you have arrived at your destination.
3.7.1 Calibrating compass
). After activating the
69