Suunto TRAVERSE series User Manual page 65

3.26.1 Checking your location
Suunto Traverse allows you to check the coordinates of your current
location using GPS.
To check your location:
1. Press [Start] to enter the start menu.
2. Scroll to NAVIGATION using [Start] and enter with [Next].
3. Press [Next] to select Location.
4. Press [Next] to select Current.
5. The watch starts searching for a GPS signal and displays GPS
found after acquiring the signal. After that your current
coordinates are shown on the display.
TIP: You can also check your location while you are recording an
exercise by keeping [Next] pressed to access the options menu.
3.26.2 Adding your location as a POI
Suunto Traverse allows you to save your current location or define a
location as a POI. You can navigate to a saved POI anytime, for
example, during your exercise.
You can store up to 100 POIs in the watch. Note that also routes take
up this quota. For example, if you have a route with 60 waypoints, you
can additionally store 40 POIs in the watch.
You can select a POI type (icon) and POI name from a pre-defined list,
or freely name the POIs in Movescount.
To save a location as a POI:
65