Suunto TRAVERSE series User Manual page 37

NOTE: Dry skin under the belt electrodes, a loose belt, and
synthetic shirt materials can cause abnormally high heart rate readings.
Moisten the belt electrodes well and tighten the belt to avoid heart rate
peaks. If you are otherwise concerned about your heart rate, please
consult a doctor.
3.10.3 Starting recording
To start recording:
1. Press [Start] to enter the start menu.
2. Scroll to Activity, and select [Next]
3. The watch automatically starts searching for a GPS signal. Wait for
the watch to notify that GPS signal has been found, or press [Start]
to select Start and begin recording immediately.
4. Recording your exercise starts automatically when GPS signal
is found, unless you press [Start] to begin recording
immediately. To access general menu while exercising, keep
[Next] pressed.
3.10.4 During recording
As soon as the exercise is recording, you can access additional
displays that show information related to your activity. By default, you
will see one additional display showing recording statistics (duration,
speed, distance) and one additional display showing your breadcrumb
track.
In Movescount service, you can create up to 4 additional displays with
more data fields.
37