Conducting Wireless Transactions; Conducting Smart Card Transactions - VeriFone VX 675 Installation Manual

To Conduct a
Bluetooth
Transaction:
Conducting
Wireless
Transactions
Conducting
Smart Card
Transactions
To Conduct a Smart
Card Transaction
CAUTION
•
Ensure that the terminal is paired with the Bluetooth Base not more than 100
meters away.
•
Follow the on-screen instructions provided with your application.
To conduct a wireless transaction:
•
Ensure the terminal is in an optimal position for transmitting.
•
Follow the on-screen instructions provided with your application.
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position a smart card with the contacts facing upward (see illustration below).
2
Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
3
Remove the card only when the application indicates the transaction is
complete.
Figure 21 Inserting a Smart Card
Do not remove the smart card in the card reader until the transaction is complete.
Premature card removal will invalidate the transaction.
T
ERMINAL

Conducting Wireless Transactions

VX 675 I G
NSTALLATION UIDE
S
ETUP
29