Troubleshooting; General Failure - Acer 6000 User Manual

1.6

Troubleshooting

If you encounter a hardware problem, review the following suggestions before
calling for service.

General Failure

Are all cables securely plugged in?
Are all system components and peripherals turned on?
Is the system main power switch on?
Is the power outlet burned out? You may check this by plugging in and
turning on some other piece of equipment.
Are any cables damaged? Are they properly routed and coiled? Entwined
cables may cause signal interference.
Front Panel Light Doesn't Work
Check inside the system unit and make sure that the front panel LED
connector is correctly plugged in (refer to section 2.3 Jumpers and Connectors).
"Garbage" or Nothing Appears on the Screen
Is the monitor turned on? Is the screen brightness adjusted properly?
1-12 AcerPower 6000 User's Guide
Never open the monitor case. The CRT monitor
retains very high voltage levels, even after the
power is turned off. Refer all monitor service to
qualified service technicians.