Acer 6000 User Manual page 74

6. After setting the password, highlight the Set or Change Password option.
7. Press to return to the System Security screen.
8. Press to return to the main menu.
9. Press to exit the BIOS utility. A dialog box appears asking if you want to
save the CMOS data.
10. Select to save the changes and reboot the system.
Yes
11. After rebooting, turn off the system then open the housing.
12. Set switch 1 of SW1 to
The next time you want to enter the BIOS utility, you must key-in your Setup
password.
Changing or Removing the Setup Password
Should you want to change your setup password, do the following:
1. Enter the BIOS utility and select System Security.
2. Highlight the Setup Password parameter and press
Password menu appears.
3. From the Setup Password menu, highlight the Set or Change Password option.
4. Enter a new password.
5. Press to return to the System Security screen.
6. Press to return to the main menu.
to enable the password function.
Off
or . The Setup
Chapter 3 - BIOS Utility 3-27