Headphones Operation - Chrysler PACIFICA 2018 User Manual

NOTE:
Certain high-end video games will exceed the
power limit of the vehicle's Power Inverter. Refer to
"Power Inverter" in "Getting To Know Your Vehicle"
in this guide for further information.

Headphones Operation

The headphones receive two separate channels of
audio using an infrared transmitter from the video
screens.
If no audio is heard after increasing the volume
control there are a number of things that can be
done to troubleshoot the issue:
• Verify that the screen is turned on.
• Check to see that the channel is not muted.
• Make sure that the headphones are on.
• Verify that the headphone channel selector button
is on the desired channel. This button switches
between the audio of screen 1 and screen 2.
• Install two new AAA type batteries in the
headphones.
Uconnect Theater Headphones
1 — Power ON/OFF Button
2 — Volume Control Wheel
3 — Channel Selection Button
The headphone power indicator and controls are
located on the right ear cup.
NOTE:
Uconnect Theater must be turned on before sound
can be heard from the headphones. To conserve
battery life, the headphones will automatically turn
off approximately three minutes after the Uconnect
Theater system is turned off.
Changing The Audio Mode For Headphones
1. Ensure the remote control and the headphones
are on the same channel.
2. Push the Home button on the remote control.
281