Camera Installation - Speco HTFB2TM Instruction Manual

CAMERA INSTALLATION

CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500mA)
P o w e r In p u t :R E D
C e n te r : (+)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
R E D (+)
L B A C K :(-)
3. CONNECT VIDEO CABLE
1) WHEN USING IT AS ANALOG OUTPUT,
CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK.
C V B S
2) WHEN USING IT AS TVI OUTPUT,
CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.
T V I
4. CONNECT RS-485 CABLE
- CONNECT 2 WIRE CABLE TO THE 485 PORT AS BELOW.
ORANGE (+)
WHITE (-)
D C 12V P owe r S upply
- 7 -
6
A C 24V
P owe r S upply