Akai DR16 Operator's Manual page 6

Messages during Backup and Restore
The file count or the following messages will be displayed whilst the DR16 is backing up or
restoring data to or from the SCSI Tape Drive:
PROJECT SAVE
The new menu
enables to save projects under different names.
This allows you to save a project that may have undergone extensive editing either as an
alternative version of the song or as a safeguard in case of any irreversible mistake.
Another application for this is to create 'template' projects. These are empty projects that contain
certain configurations of customised settings files which can subsequently be used as the basis
for new projects that require these settings. The actual projects you make using these 'templates'
can, of course, also be saved with a new name.
To save a project with a different name.
1) Press the SUB-MENU key followed by the UTILITY key.
2) Select
3) Input the new project name you want to save using the JOG/SHUTTLE control.
4) Press the STORE/ENT key to save.
Preparing to access the SCSI Tape Drive
Searching the backup data on the SCSI tape
Rewinding the SCSI tape
Ejecting the SCSI tape from the SCSI Tape Drive
has been added to the UTILITY page of SUB-MENU mode. This
using the JOG/SHUTTLE control then press the STORE/ENT key.
DR16 V2.0 Addendum
Page 5