Problem Solving Guide; Check Indicators And Fault Messages - Miele TCE 630 WP Operating Instructions Manual

Problem solving guide

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.

Check indicators and fault messages

Problem
 lights up after a
programme has been
cancelled and a signal
sounds
 lights up at the end
of a programme
46
Possible cause and remedy
The condensed water container is full or there is a
kink in the drain hose.
 Empty the condensed water container.
 Check the drain hose.
 See "Cleaning and care".
To switch off :
 Open and close the door (with the dryer switched
on).
There is a build-up of fluff in the airways.
 Clean the fluff filters.
 Clean the plinth filter.
 See "Cleaning and care".
To switch off :
 Open and close the door (with the dryer switched
on).