Selecting Delay Start (If Required); Starting A Programme - Miele TCE 630 WP Operating Instructions Manual

3. Selecting a programme and starting it

Selecting Delay start (if required)

With Delay start you can delay the
start of a programme from 
(minutes) up to  (hours).
However: Delay start cannot be used
with the Warm air programme.
Please see "Delay start" for more
information.
 Touch the  sensor.
 lights up brightly.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
26

Starting a programme

 Touch the flashing Start/Stop sensor.
Start/Stop lights up.
Notes
– The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
"Operating the tumble dryer").
– The dryer measures the residual
moisture of the laundry and
calculates the required programme
duration.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
Avoid over-drying laundry and
garments.
Otherwise they can wear out.
Energy saving:
After 10 minutes, the indicators dim and
the Start/Stop sensor starts flashing.
 Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running
programme).