Removing the protective foil
and stickers
Please remove
– the protective foil from the door.
– any stickers from the front and the lid
(Exception: warning labels must not
be removed).
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
After installing the tumble
dryer
Before using the tumble dryer for
the first time, ensure that it is
installed and connected to the
electricity supply correctly. If it has
not been transported as described in
"Installation and connection", then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply.
Following the procedure for
using for the first time outlined
in these instructions
Read "1. Notes on correct laundry
care" and "2. Loading the tumble
dryer".
You can then load the tumble dryer
and select a programme as described
in "3. Selecting a programme and
starting it".
Before using for the first time
19