Examples - Miele TCE 630 WP Operating Instructions Manual

Examples

– Drainage into a sink or floor gully
Use the hose holder to prevent the
drain hose from becoming kinked.
 Press the small catches on the left
and right of the hose holder with your
thumbs (black arrows) and ...
 ... pull the hose holder forwards to
remove it (white arrows).*

If you want to drain the water off
into a sink or basin, you will need to
secure the hose carefully, e.g. by
tying it to a tap, to make sure it
cannot slip during use (see the
drawing under "Installation and
connection - Front view").
Overflowing water can cause
damage.
 The non-return valve can be fitted in
the end of the hose.
* You can refit the hose holder at a
later stage if you decide that you no
longer want to drain the condensed
water externally.
Installation and connection
Direct connection to a sink drain
outlet
 Remove the following from the back
of the dryer at the top: Adapter 1 and
hose clip 3 behind it.
 Connect the drain hose as described
below.
59