Operation - Poulan Pro 545123582 Instruction Manual

Adjusting Screw - - 1/4 Turn
S Lift up the tip of the bar and tighten the
chain brake nuts with the bar tool.
S Recheck chain tension.
KNOW YOUR CHAIN SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Front Hand Guard
Chain
Adjustment Tool
(Bar Tool)
Chain
Bar Oil Fill Cap
Cylinder Cover
Throttle
Lockout
Rear
Handle
Throttle
Choke/
Chain
Trigger
Fast Idle
Brake
Lever
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCK- -OUT
The THROTTLE LOCK- -OUT must be
pressed before you can squeeze the throttle
trigger. This feature prevents you from acci-
dentally squeezing the trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pulling the
CHOKE/FAST IDLE LEVER out to the full ex-
WARNING:
with a loose chain, the chain could jump off
the guide bar and result in serious injury.

OPERATION

Front Handle
Muffler
Starter
Housing
Fuel Mix Fill Cap
Adjusting
Screw
Guide Bar
Chain Brake
Nuts
Chain
Catcher
tent for cold starting or after refueling. The
choke provides additional fuel to the engine
during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the car-
buretor to provide quicker starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake activates automatically in the event of
kickback. The chain brake activates manually
if the front hand guard is pushed forward. The
chain brake is disengaged by pulling the front
hand guard back toward the front handle as far
as possible.
8
Chain Brake
Nuts
If the saw is operated
Starter Rope
ON/STOP
Switch
Primer
Bulb
Chain
Direction
of Travel
Bar Sprocket Hole