Poulan Pro Farmhand 2050 User Manual
User manual
Hide thumbs
Also See for Farmhand 2050:
- Parts list (6 pages) ,
- Assembly (108 pages) ,
- Instruction manual (56 pages)
Table of Contents
Advertisement
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual del operador y siga todas las advertencias e instruc-
ciones de seguridad. El no hacerlo puede resultar en lesiones graves.
AVERTISSEMENT:
Lire le manuel de l'utilisateur et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Electrolux Home Products
North America
Div. of WCI Outdoor Products, Inc.
Augusta, GA 30907
Copyright E2001 WCI Outdoor Products, Inc.
R
2050
2150
U L
R
Electrolux Home Products
North America
Div. of WCI Outdoor Products, Inc.
Mississauga, Ontario l5T 1K6
530088540
2/12/01
Advertisement
Table of Contents
Related Manuals for Poulan Pro Farmhand 2050
Summary of Contents for Poulan Pro Farmhand 2050
- Page 1 2050 2150 For Occasional Use Only WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. ADVERTENCIA: Lea el manual del operador y siga todas las advertencias e instruc- ciones de seguridad.
- Page 2 IDENTIFICATION OF SYMBOLS WARNING! This chain saw can be dangerous! Careless or improper use can cause serious or even fatal injury. Read and understand the Operator’s Manual before using the chain saw. Always use two hands when operating the chain saw. WARNING! Contacting the guide bar tip with any object should be avoided;...
- Page 3 S Keep all parts of your body away from the teners securely tightened. chain when the engine is running. S Use only POULAN or POULAN PRO ac- S Keep children, bystanders, and animals a cessories and replacement parts as rec- minimum of 30 feet (10 Meters) away from ommended.
- Page 4 Avoid Pinch- -Kickback: MAINTAIN CONTROL S Be extremely aware of situations or ob- structions that can cause material to pinch Stand to the the top of or otherwise stop the chain. left of the saw S Do not cut more than one log at a time. S Do not twist the saw as the bar is with- drawn from an undercut when bucking.
- Page 5 has been demonstrated to significantly re- toward the operator. Either of these events duce the number and seriousness of kick- may cause you to lose control of the saw backs when tested in accordance with which could result in serious injury or even safety requirements for gasoline powered death.
- Page 6 Computed kickback angle (CKA) Table CKA without chain brake MODEL Length CHAIN P/N 2050 952044368 14” 952051209 2150 952044370 16” 952051211 SAFETY NOTICE: Exposure Location of shipping spacer vibrations through prolonged use of gasoline powered hand tools could cause blood...
- Page 7 Adjusting the tension: bar. Remember this pin moves the bar for- ward and backward as the screw is turned. Chain tension is very important. Chain S Replace the chain brake nuts and tighten stretches during use. This is especially true finger tight.
- Page 8 OPERATION KNOW YOUR CHAIN SAW READ THIS OPERATOR’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Front Handle Front Hand Guard Chain...
- Page 9 S Squeeze and hold throttle trigger. With resists high temperature thinning. thumb press fast idle lock down; then re- POULAN or POULAN PRO bar and chain oil lease throttle trigger. is not available, use a good grade SAE 30 oil.
-
Page 10: Chain Brake
CHOKE chase if purchased from a servicing dealer, or to the nearest authorized master service (SIDE VIEW) dealer. S This saw is equipped with a chain brake. The brake is designed to stop the chain if kickback occurs. S The inertia--activated chain brake is Choke Knob activated if the front hand guard is pushed... - Page 11 ing your saw before you begin a major Plan a clear retreat path sawing operation. Squeeze the throttle trigger and al- low the engine to reach full speed before cutting. Begin cutting with the saw frame Direction of Fall against the log. Keep the engine at full speed the en- tire time you are cutting.
- Page 12 NOTE: When overcutting use light downward pres- Before felling cut is complete, use sure. wedges to open the cut when necessary to control the direction of fall. Use wood or Overcutting plastic wedges, but never steel or iron, to avoid kickback and chain damage. S Be alert to signs that the tree is ready to fall: cracking sounds, widening of the fell- Undercutting...
- Page 13 S Keep the tree between you and the chain. Cut from the side of the tree opposite the branch you are cutting. S Remove larger, supporting branches with cutting techniques described in the bucking section. S Always use an overcut to cut small and free- ly hanging limbs.
- Page 14 AIR FILTER S Reinstall muffler cover and 2 screws (7-8 ft/lbs). CAUTION: Do not clean filter in gasoline or CARBURETOR ADJUSTMENTS other flammable solvent to avoid creating a fire hazard or producing harmful evaporative Your carburetor is equipped with limiter emissions.
- Page 15 Poulan or Poulan Pro brand NEED ASSISTANCE? gasoline chain saw is free from defects in ma- terial and workmanship and agrees to repair or replace under this warranty any defective gas-...
- Page 16 Protection Agency/Environment Canada aware that POULAN/WEED EATER POULAN/WEED EATER, DIVISION deny you warranty coverage if your lawn and OF WCI OUTDOOR PRODUCTS garden equipment engine or a part of it has pleased to explain the emissions control...
- Page 17 TROL WARRANTY PARTS LIST: Carbure- can be grounds for disallowing a warranty tor, Ignition System: Spark Plug (covered up claim. POULAN/WEED EATER is not liable to to maintenance schedule), Ignition Module. cover failures of warranted parts caused by MAINTENANCE STATEMENT: The owner the use of add--on or modified parts.