Firmware Upload; Figure 9. File Open Dialog Box For Firmware Uploading - Wiznet WIZ107SR User Manual

2.2 Firmware Upload

1) Run the Configuration Tool program and click "Search" button, and input search
password in the password popup dialog if you set the search password.
2) If the module is properly connected to the network then MAC address will be displayed
on the "Serial to Ethernet" search result area.
3) Select a MAC address shown in search result and click "Upload" button.
☞ Before uploading through Ethernet, you should set the network information of
WIZ107SR first by Configuration Tool program.
4) When the window as shown below Figure is displayed, select file for upload and click
"Open" button.
☞ Do not upload any other files except for WIZ107SR application firmware file.

Figure 9. File open dialog box for Firmware uploading

(WIZnet Co., Ltd.)
WIZ107SR User Manual
16