Transfer A Call - Toshiba IP-PBX DIGITAL TELEPHONE Simplified User Manual

7. TRANSFER A CALL

OPTION 1 (Direct transfer without informing)
a) Press CONF/TRNS or
b) Enter the Extension Number and replace handset
OPTION 2 (Informed before transferring call)
a) Press CONF/TRNS or
b) Enter the Extension Number and wait for the extension to answer
c) After informing, replace handset to transfer the call
OPTION 3 (Voice out before transferring call)
a) Press CONF/TRNS or
b) Enter the Extension Number followed by 2
c) This will allow you to announce on the specified Ext No without
the extension pickup the handset
Note : Call will be redirected back after 32 seconds if there is no reply
from the transferred extension.
8. KEYPHONE/SYSTEM SPEED DIAL PROGRAMMING
-System speed dial can only be programmed by system administrator
-Phone number will be stored in a 3-digit memory code by programming
as follows:
a) Press #66
b) Enter the memory code (Personal Speed Dial – 100 to 109)
(System Speed Dial – 200 to 999)
c) Press 9 followed by Customer Telephone Number
d) Press # button
e) Replace handset or press SPKR or
Note : To call out using speed dial, press the SPDIAL or
button, followed by selected memory code.
button