Voip Configuration Commands (H.323) - Davolink DV-201DM User Manual

[Example]
DV_GW/CONFIG/ADDRESS> myaddr
===============================================================
MYADDR Command Usage
===============================================================
myaddr intf <port> nums
===============================================================
intf ; local interface name(fxs,fxo)
port ; port number of interface (0 ~ )
nums ; destination address ('0' ~ '9','*','#',NULL)
===============================================================
DV_GW/CONFIG/ADDRESS> myaddr fxs 0 7183312
DV_GW/CONFIG/ADDRESS> myaddr fxs 0 null
DV_GW/CONFIG/ADDRESS> show
===============================================================
Address TABLE
===============================================================
INTF PORT LOCAL-ADDR
===============================================================
FXS 0
FXS 1 7183313
===============================================================

2.3.6 VoIP Configuration Commands (H.323)

1. Command directory
DV_GW/CONFIG/VOIP>
2. Command function
This command displays and sets up all the parameters required for the H.323.
Details can be seen by typing an appropriate command from the
"DV_GW/CONFIG/VOIP>" prompt to verify it.
Changes and verifies the parameters needed for H.323, the parameters are as
follows;
Parameter
RAS Parameters
PEER-ADDR
G/K Interface Mode
E.164 Address
H.323 ID
Time out
H.323 Prefix
RAS TTL
GROUP-PORT
Description
Connection mode of G/K.
IP address and Port number of the first G/K.
IP address and Port number of the second G/K.
H.323 ID of the system
Prefix to be registered to G/K.
Re-registration cycle (second) after first registration
to G/K.
2 - 45