Address Configuration Commands - Davolink DV-201DM User Manual

DV-201DM for H.323 & SIP
port ; port number of interface (0 ~ )
nums ; prefix numbers ('0' ~ '9','*','#','~','?',NULL)
====================================================================
DV_GW/CONFIG/ROUTE> del fxs 0 200
Prefix Table Delete success

2.3.5 Address Configuration Commands

1. Command directory
DV_GW/CONFIG/ADDRESS>
2. Command function
This command is used for managing a specified port number on FXS interface.
3. Available commands
Commands
Show
Myaddr
SHOW
This command is used to display specified port number registered in address table.
Executing "show" at "DV_GW/CONFIG/ADDRESS>" prompt shows current
address table.
[Example]
DV_GW/CONFIG/ADDRESS> show
==========================================================
Address TABLE
==========================================================
INTF PORT LOCAL-ADDR
==========================================================
FXS 0 7183312
FXS 1 7183313
==========================================================
MYADDR
This command is used to register specified port numbers that are used as calling
party address in outgoing calls to track calls. Executing "myaddr" at
"DV_GW/CONFIG /ADDRESS>" to see usage details.
2 - 44
Description
show registered addresses
register local addresses
PEER-ADDR GROUP-PORT