Davolink DV-201DM User Manual page 49

7. The system will be automatically restart, after completion of upgrade.
8. If log server feature is used, DV-201DM sends event messages to defined
server (using UDP port 514). Select "Used", click "Apply" button.
When auto configuration feature is used, the created configuration data in CDS
server is downloaded to DV system. Select "Used", enter the IP address of CDS
server and click "Apply" button. By using the CDS server, you can control the
configuration data of all systems remotely via the MAC addresses of each system.
11.Firmware Upgrade
Click Firmware Upgrade link to access the Firmware Upgrade page, illustrated
below.
Only root and manager can access this web page.
We can upgrade firmware of our product from this web page.
Do not click other pages while your upgrading the firmware of the product, it will
result incompletion of upgradation.
2 - 33