Accessing The System With Telnet; Basic Commands - Davolink DV-201DM User Manual

2.3 Accessing the system with TELNET

For VoIP Services, there are many configuration values you need to set. You may
try telnet connection to set the configuration values. Detailed procedures are as
follows:
- Connect PC to PC port of DV-201DM
- Open a "COMMAND PROMPT" Command Window.
- Try pinging to 192.168.1.254. If you get response, you can proceed to the next
step.
- Type "telnet 192.168.1.254 6000", and you can log-in to DV-201DM.
- Try "root" for login name, "admin" for password.
- Reply "DV_GW>", you've accessed DV-201DM.
[Example]
Trying 192.168.1.254 (PORT: 6000)...
Connected to 192.168.1.254...
DV201DM Internet Phone Gateway System
Made by Davolink,Inc.
Motorola MPC850
SW: Release 1.00(2003-10-1 PM 06:23:26)
HW: MPU 0.51 (1Ch FXS + 1Ch FXO)
Now System Running...
Login: root
Password: *****
DV_GW>

2.3.1 Basic Commands

DIR (or LS)
"dir" is the same command as "ls" and displays the executable commands and
sub-directory which can be run in the current directory. The sub-directory is
displayed with "/" added after the last character to differentiate from the executable
commands. The following example is the result after executing "dir" command on
DV_GW> prompt, where DV_GW is system name. The capitalized letters in the
directory name and command name is the minimum number of characters to be
entered in changing a task directory or executing a command and they are used
as abbreviations for a directory or a command.
2 - 35